16
Weremonkey
mishi edited this page 2018-10-18 00:08:18 +02:00
Weremonkey
Description
The weremonkey is a very dangerous little creature with lots of sharp teeth and eyes that light up when he screams or laughs in the most terrifying way.
It is a stuffed toy with two possible motion/sound patterns and LED eyes.
Network location
- Hostname: weremonkey
- URL: http://weremonkey
Exhibit specific API
| URL | Verb | Description |
|---|---|---|
/scary_actions/laugh |
GET/POST | Executes scary action laugh that randomly triggers workflow Laugh 1 or 2 |
Workflows
- Laugh 1: Eyes on, trigger laugh 1, wait, stop laugh 1, eyes off
- Laugh 2: Eyes on, trigger laugh 2, wait, stop laugh 2, eyes off
Raspberry Pi pinout:
| RPi Pin | RPi Name | Destination | Wire | Function |
|---|---|---|---|---|
| 2 | 5V | Relay JDVCC | red | |
| 4 | 5V | 1000R to R3M | white | |
| 6 | Ground | Relay Gnd | orange | |
| 12 | GPIO18 | Relay In1 | yellow | Enable Laugh 1 |
| 16 | GPIO23 | Relay In2 | gren | Trigger Laugh 2 on/off |
| 17 | 3V3 | Relay VCC | grey | |
| 18 | GPIO24 | Relay In3 | blue | Enable LED eyes |
| 22 | GPIO25 | Relay In4 | purple | N.C. |